Double Lifeline Set for 

Catalina 22

This set came off of a 1971 Catalina 22, hull # 569.  I refurbished the boat as a racer.  This set is perfect for the safety conscious cruiser who likes to participate occasionally in a race.  The stanchions and pulpits are not welded.  They are fastened mechanically with set screws.  For the big race, the stanchions, lifelines, and stern pulpit can be easily removed from the base for the race and reinstalled for the next cruise.  You leave the base, properly mounted and bedded, in place and remove the stanchions and stern pulpit.  You can use your existing bow pulpit with this set if you like by simply removing the attachment points on this bow pulpit and mounting them on yours.

The bases are chrome plated brass.  The Tubing is Stainless Steel.  Some of the Chrome plating has come off of the bases.  This is purely cosmetic.  There is a slight upward bend in the front of the bow pulpit. 

I will sell this entire set for $200 plus my actual cost of shipping and boxing.  Because of its non welded construction, it can be folded pretty flat to reduce shipping costs.  If you live fairly close to Chattanooga, TN, I will meet you half way and deliver it.

Contact:  Bill Robertson, fs50751@comcast.net , 423-870-8334.

Click on the thumbnail for a larger picture.

Bow Pulpit 1.JPG (915026 bytes)  Bow Pulpit 2.JPG (912952 bytes)  Bow Pulpit 3.JPG (925092 bytes)  Bow Pulpit Attachment.JPG (776912 bytes)  Lifeline Stanchions.JPG (881925 bytes)  Lifeline Stanchion.JPG (916059 bytes)  Lifeline Turnbuckles.JPG (914565 bytes)  Lifeline Ends.JPG (873351 bytes)  Stanchion Base 1.JPG (915505 bytes)  Stanchion Base 2.JPG (935164 bytes)  Stanchion Base 3.JPG (870709 bytes)  Stern Pulpit 1.JPG (922281 bytes)  Stern Pulpit 2.JPG (884457 bytes)  Stern Pulpit Lifeline Attachments.JPG (934897 bytes)  Stern Pulpit Front Base.JPG (917447 bytes)  Stern Pulpit Rear Base.JPG (893209 bytes)